Concrete Pool Decks
Concrete Pool Decks in Provo & Utah County, UT
A durable, slip-resistant concrete pool deck transforms your backyard and holds up through Utah’s brutal freeze-thaw cycles. Bedrock Concrete Pros installs new pool decks and resurfaces aging ones across Utah County and the Wasatch Front — from simple broom-finished slabs to stamped and textured designs built to handle chlorine, UV, and hard winters.
Pool decks do more work than most concrete flatwork on a property. They get soaked daily, bake in direct summer sun, stay wet for hours, and then freeze solid in January. In Utah’s climate, that combination demands a deck poured from the right mix, with proper drainage, and finished in a surface that won’t turn into a slip hazard. Bedrock Concrete Pros builds pool decks with those demands in mind — and we back our work with a workmanship warranty.
New Pool Deck Installation & Resurfacing Services
Whether you’re installing a brand-new deck around an in-ground pool or breathing new life into an aging, spalled surface, we handle the full scope:
- New concrete pool decks — full installation from excavation and sub-base prep to pour, finish, and sealing around in-ground pools.
- Pool deck resurfacing & overlays — a fresh, durable wear surface over structurally sound existing concrete, skipping the cost of full tear-out.
- Existing deck expansion — widen a narrow deck or add a new section for seating, dining, or a hot-tub pad.
- Crack repair & joint maintenance — seal and repair cracked or spalled sections before they worsen and allow water intrusion under the slab.
- Concrete sealing — penetrating or film-forming sealers designed to resist chlorine, UV exposure, and freeze-thaw damage.
- Drainage corrections — re-grading or adding drainage channels to keep standing water off the deck and away from your pool shell and foundation.
Pool Deck Finishes: Slip-Resistant & Utah-Tough
The finish you choose affects not just how your deck looks, but how safe and comfortable it is underfoot. All of our pool deck finishes are applied with the wet, barefoot environment in mind:
Broom Finish
The reliable standard for pool decks. A medium broom drag creates a uniform, slip-resistant texture that is affordable, easy to maintain, and reads clean in most backyard designs.
Sealing options →Stamped & Textured Concrete
Stamped patterns — flagstone, slate, or tile looks — with an anti-slip texture additive or light broom drag. High visual impact around a pool without the grout lines that harbor algae.
See stamped concrete →Exposed Aggregate
A pebble-surface finish that naturally grips wet feet, handles heavy UV without fading, and hides the small surface wear that comes with poolside use. A popular choice across Utah Valley.
Decorative options →Cool-Deck & Spray Textures
Acrylic or cementitious spray coatings applied over existing concrete reduce surface temperature on hot summer days — an especially practical choice for Utah’s 95°F+ July afternoons when barefoot comfort matters.
Coating options →Finish selection also affects sealing needs. Stamped and exposed-aggregate surfaces benefit from a color-enhancing sealer to bring out the look, while broom-finished slabs typically use a penetrating sealer that doesn’t alter the surface appearance. See our concrete sealing and coatings page for full details.
Built for Utah’s Freeze-Thaw Cycles & Pool Chemistry
Pool decks in Utah face a double threat: aggressive pool chemistry on one side and hard winters on the other. Standard concrete mixes and generic construction practices are not enough here. We pour pool decks with the following approach:
- Air-entrained 4,000 PSI concrete — microscopic air pockets allow freezing water to expand within the slab rather than spalling the surface. Critical for any exterior slab in Utah.
- Proper sub-base compaction — we excavate and compact road-base material so the slab has stable, uniform support. Settling from a weak base causes cracking and drainage problems.
- Rebar or wire mesh reinforcement — ties the slab together and controls cracking, especially important around curved pool edges and odd-shaped deck sections.
- Correctly spaced control joints — control joints guide any shrinkage cracking to predictable, low-visibility locations and make long-term maintenance easier.
- Drainage slope — we pitch the deck away from the pool (typically 1/8”–1/4” per foot) to move water off the surface quickly and prevent standing water that accelerates freeze-thaw damage.
- Chlorine- and UV-resistant sealer — pool chemical splash and intense UV will degrade unsealed concrete. We recommend a quality sealer at installation and resealing every 2–3 years.
Avoid de-icing salts on your pool deck — especially during the first winter after a new pour — as they aggressively attack concrete surfaces. Sand is a safer alternative for traction.
Concrete Pool Deck Cost in Utah
Pool deck pricing varies based on the size of the deck, the finish selected, whether an existing surface needs to be removed, and site access. Below are typical installed price ranges for planning purposes:
These are planning-level estimates only. Your actual price depends on deck size, finish, site conditions, and scope. Contact us for a free written quote.
Resurfacing an existing deck costs substantially less than a full tear-out and replacement, but it requires that the existing concrete be structurally sound. We’ll assess your current deck honestly and let you know which approach makes more sense for your situation. Request a free estimate to get an exact number for your project.
Drainage, Slope & Safety: What Good Pool Deck Design Looks Like
A pool deck has unique design requirements that go beyond standard flatwork. Water is constantly present — from splashing, rain, and hose-downs — so drainage is not optional. A well-designed pool deck:
- Slopes away from the pool shell — protecting the pool surround from water undermining and soil erosion.
- Drains away from the house foundation — directing poolside runoff to landscaping or a channel drain, not under your home.
- Uses a slip-resistant finish throughout — the entire deck surface, not just the immediate pool edge, needs wet-foot traction.
- Keeps control joints out of high-traffic zones — joints are necessary, but we plan them away from pool entry steps and diving areas where trip hazards are a safety concern.
- Accommodates the pool equipment pad — pump, filter, and heater pads integrated into the overall deck plan look cleaner and simplify maintenance access.
Thinking About Resurfacing?
If your existing pool deck is cracked, faded, or just looking tired, resurfacing is often the most cost-effective way to restore it. We can apply a new textured overlay, add a cool-deck coating, or repair and reseal — all without the disruption and cost of tearing out the old slab.
Talk to us about what’s right for your deck: free estimate or call (801) 854-7174.
Our Pool Deck Installation Process
Every pool deck project follows the same careful sequence to ensure a surface that lasts:
How We Install Your Pool Deck
Free On-Site Estimate
We visit your property, assess the existing conditions (or new layout), measure the deck area, and give you a clear written quote covering materials, finish, and scope.
Site Prep & Forming
We excavate or prepare the existing surface, compact the sub-base, set forms around the pool edge, place rebar or mesh reinforcement, and establish drainage slope before any concrete is poured.
Pour, Finish & Texture
We pour the concrete, strike it off, and apply your chosen finish — broom drag, stamp pattern, or aggregate exposure — while it’s workable. Edges and expansion joints are carefully detailed.
Cure, Seal & Walkthrough
We cut control joints, let the slab cure properly, then apply a chlorine- and UV-resistant sealer. We walk the finished deck with you before we consider the job done.
Why Choose Bedrock for Your Pool Deck
- Licensed & insured — Utah Lic. #14282236-5501
- Free, no-pressure written estimates
- Air-entrained 4,000 PSI mixes designed for Utah freeze-thaw
- Proper sub-base compaction and drainage slope on every project
- Slip-resistant finishes spec’d for wet, barefoot use
- Chlorine- and UV-resistant sealing at completion
- Backed by our workmanship warranty
We install pool decks throughout Provo, Orem, Lehi, American Fork, Pleasant Grove, and across Utah County and the Wasatch Front. If you’re planning a new pool or want to upgrade an existing deck, we’re a free estimate call away.
Explore related services: stamped and decorative concrete for decorative finish options, concrete sealing and coatings to protect your investment, and concrete repair and resurfacing if your existing deck needs work before summer.
Concrete Pool Deck FAQs
What is the best concrete finish for a pool deck in Utah?
Broom finish is the most popular choice — it’s durable, slip-resistant, and cost-effective. Exposed aggregate is also excellent around pools because it provides natural traction, resists UV fading, and hides surface wear. Stamped concrete with a non-slip additive works well for homeowners who want a more decorative look. All three hold up well to Utah’s freeze-thaw climate when installed and sealed correctly.
Can I resurface my existing pool deck instead of replacing it?
Yes, if the existing concrete is structurally sound — meaning it’s not severely cracked, heaved, or sinking — resurfacing with a concrete overlay or cool-deck coating is a cost-effective option. We’ll assess your current deck honestly and recommend replacement only if the base or slab condition genuinely warrants it.
How do I keep my pool deck from getting too hot in the summer?
Pool deck surface temperature is a real issue in Utah’s summers. Lighter-colored concrete finishes reflect more heat than dark ones. A cool-deck or acrylic spray texture coating significantly reduces surface temperature compared to standard concrete. Exposed aggregate also tends to stay cooler than smooth, sealed surfaces because of its texture and air pockets. We can walk you through the options at your free estimate.
How often should I seal a concrete pool deck?
Plan on resealing every 2–3 years. Pool decks are exposed to more moisture and chlorine splash than most concrete surfaces, which breaks down sealers faster. A fresh sealer protects the concrete from chemical attack, UV damage, and freeze-thaw spalling. See our sealing and coatings page for details on sealer types.
What drainage slope is required for a pool deck?
Standard practice is a minimum slope of 1/8 inch to 1/4 inch per foot away from the pool and toward drainage. This keeps water moving off the deck surface and prevents the standing water that causes freeze-thaw damage and slip hazards. We design drainage direction into every pool deck from the forming stage.
Do you install pool decks in Lehi, Draper, and other Utah cities?
Yes. Bedrock Concrete Pros installs and resurfaces pool decks throughout Utah County — including Provo, Orem, Lehi, American Fork, and Pleasant Grove — and in south Salt Lake County including Draper, Sandy, and South Jordan. Call (801) 854-7174 to confirm coverage for your address.
Request Your Free Quote
Tell us about your project and we’ll get back to you fast. Prefer to talk? Call (801) 854-7174.
Ready for a New Pool Deck? Get Your Free Quote
Tell us about your pool deck project and we’ll schedule a free on-site visit and give you a clear, written estimate. No pressure, no obligation.