Stamped & Decorative Concrete
Stamped Concrete in Provo & Utah County, UT
Get the look of natural stone, slate, brick, or pavers at a fraction of the cost. Bedrock Concrete Pros installs stamped, stained, colored, and decorative concrete for patios, driveways, pool decks, and walkways across Utah County and the Wasatch Front — built to handle Utah’s freeze-thaw winters and look great for decades.
Decorative concrete has come a long way from plain gray slabs. Whether you want an ashlar slate patio that complements your landscaping, a herringbone brick-pattern driveway, or a polished interior floor that looks like natural stone, modern stamping and coloring techniques can achieve it — and with proper installation and sealing, it will outlast most alternatives in Utah’s demanding climate. Bedrock Concrete Pros handles every step in-house: design, color selection, formwork, pour, stamp, and seal.
Decorative Concrete Finishes We Install
Every decorative concrete project starts with choosing the right finish for your space, budget, and goals. Here are the options we work with most:
- Stamped concrete — rubber mats pressed into fresh concrete create realistic patterns that mimic natural pavers, flagstone, slate, brick, cobblestone, or wood plank. Color can be mixed in, broadcast on top, or applied as a stain after curing.
- Integral color — pigment mixed throughout the concrete so the color is consistent all the way through, not just on the surface. Chips and scratches don’t reveal plain gray beneath.
- Color hardener & release — a dry-shake color hardener is broadcast on the slab surface before stamping for a dense, rich color; a powder or liquid release agent is applied over the stamps to create contrast and an antiqued look in the recesses.
- Acid stain & water-based stain — applied after curing, stains penetrate the surface to create translucent, variegated color effects ranging from earthy terra cotta tones to cool slate blues. No two stained slabs look identical.
- Exposed aggregate — the cement paste is washed off the surface while the concrete is still green, revealing the natural rock and stone in the mix. The result is a textured, slip-resistant surface with a natural look that hides wear exceptionally well.
- Polished concrete — mechanical grinding and polishing produce a high-gloss interior floor that is easy to maintain, durable, and compatible with radiant heating systems. Popular for basements, sunrooms, and garage conversions.
- Broom finish with borders & banding — a cost-effective way to add visual interest: a plain broom-finished field with stamped or colored borders and control-joint banding creates a clean, upscale look without the full cost of all-over stamping.
Popular Patterns for Stamped Concrete in Utah
Pattern choice has a big impact on how much a finished patio or driveway looks like its natural counterpart. The most popular options our Utah customers choose:
- Ashlar slate — large rectangular and square cuts that closely mimic quarried flagstone. Works especially well for large patios and pool decks.
- Random stone / flagstone — irregular shapes that look like hand-laid natural stone. A natural, rustic feel that pairs well with landscaping.
- Herringbone & running bond brick — classic patterns with a traditional look. Popular for front driveways and entry walkways.
- Cobblestone & fan pattern — European-style rounded cobbles or the elegant fan pattern. Excellent for curved driveways and circular patio focal points.
- Wood plank — realistic wood grain texture and plank layout that gives covered patios and pool areas a warm look without the maintenance of real wood.
- Seamless texture — a uniform, low-relief texture (slate skin, sandstone, rough stone) that adds slip resistance and visual depth without busy pattern lines. Great for large areas and pool decks.
Where Stamped & Decorative Concrete Works
Decorative concrete is versatile enough for nearly any horizontal surface on a residential property. The most common applications we handle in Utah County:
Patios
Backyard patios are the most popular application for stamped concrete in Utah. A 400 sq ft patio with ashlar slate stamping and a two-tone color scheme runs roughly $3,600–$8,000 installed. The result looks like natural flagstone but is seamless, level, and easier to maintain.
Concrete Patios →Driveways
Stamped driveways — often in a herringbone brick or cobblestone pattern with colored borders — give a home serious curb appeal. They cost more upfront than a plain broom finish but last just as long when properly sealed.
Concrete Driveways →Pool Decks
Pool decks need to be slip-resistant, comfortable underfoot in the Utah summer heat, and able to handle constant water and chemical exposure. Seamless-texture and travertine-pattern stamps with a light color palette are particularly popular choices here.
Concrete Pool Decks →Walkways & Entry Areas
A stamped or stained front walkway is a high-impact upgrade for relatively low cost. Even a simple broom-finish walkway with a stamped border and colored banding makes a home’s entry feel intentional and finished.
Sidewalks & Walkways →Stamped Concrete Cost in Utah
Decorative concrete costs more than plain concrete — you’re paying for additional materials (pigments, stamps, sealers) and more skilled labor. Here are typical installed price ranges in Utah for planning purposes:
These are typical Utah price ranges for budgeting purposes only. Your project price depends on size, site access, base prep, chosen pattern and color complexity, and current material costs. Contact us for a free written estimate.
For a more detailed breakdown, see our stamped concrete cost guide for Utah or compare options in our stamped vs. standard concrete patios article.
How We Install Stamped Concrete
Decorative concrete is unforgiving — every step has to be right because mistakes can’t be hidden. Here is how we approach each project.
Design & Color Selection
We help you choose a pattern, color, and finish that complements your home and landscape. We can show you physical samples and color chips so there are no surprises on pour day.
Base Prep & Forming
We excavate to the right depth, compact the road-base sub-base, and set forms. For Utah’s clay soils, proper base prep is non-negotiable — a settled or heaved slab will crack and lose its pattern.
Pour, Color & Stamp
We pour air-entrained 4,000 PSI concrete, apply integral color or broadcast color hardener, and press the stamp mats at exactly the right point in the curing process. Release agent is applied to prevent sticking and create depth and contrast.
Seal & Cure
After the slab cures, we apply a high-quality sealer appropriate for the finish and your climate. We cut control joints where needed and walk you through care and maintenance so your decorative concrete stays looking sharp for years.
Durability & Sealing: Keeping Decorative Concrete Looking Great in Utah
The number-one maintenance question we get: how do I keep stamped concrete looking the way it did when it was new? The answer is sealing — and in Utah, it matters more than almost anywhere else.
Utah’s high-altitude sun, hard winters, and freeze-thaw cycles are hard on the topcoat sealer that gives stamped concrete its color depth and sheen. A sealer that isn’t refreshed on schedule will become dull, chalky, or begin to peel — and once moisture gets into an unsealed stamped slab through Utah winters, you risk spalling and pattern damage.
General sealing guidelines for stamped concrete in Utah:
- Initial seal: applied at the job site after the slab cures, usually 28+ days after the pour
- Re-sealing schedule: every 2–3 years for exterior slabs (or sooner if the sheen dulls or water stops beading)
- Avoid de-icing salts — especially the first winter; they accelerate surface scaling on stamped concrete. Use sand for traction instead
- Pressure washing: safe at low-to-medium pressure; do not use harsh degreasers that strip the sealer
- Hairline cracks: fill and re-seal promptly to keep water out
Professional Re-Sealing Service
Bedrock Concrete Pros offers professional concrete sealing for existing stamped and decorative slabs. We clean, prep, and apply a fresh coat of quality sealer to bring back color depth and protect the surface through another Utah winter season.
Sealing: $1–$3 / sq ft depending on size and surface condition.
Stamped Concrete vs. Pavers & Natural Stone
Stamped concrete competes directly with clay or concrete pavers and with natural flagstone. Here’s how they honestly compare in the Utah context:
- Cost: Stamped concrete is almost always cheaper than natural stone or high-quality pavers, especially for large areas. Quality concrete pavers run $15–$30/sq ft installed; natural flagstone can exceed $30/sq ft.
- Durability: Both are very durable when installed correctly. Stamped concrete is a single monolithic surface with no joints for weeds or ants to colonize. Pavers can shift over time and may need re-leveling.
- Maintenance: Stamped concrete needs regular sealing; pavers need joint sand replenishment and occasional re-leveling. Neither is zero-maintenance.
- Repairability: Cracked or stained pavers can be replaced individually. A crack in stamped concrete requires more careful patching, though color hardeners and overlays can minimize visibility.
- Freeze-thaw performance: Air-entrained concrete stamped by an experienced crew performs well in Utah winters. Cheaper paver installations on an inadequate base will heave and shift badly.
Read our full comparison: Concrete vs. Pavers in Utah — Which Is Right for You?
Why Choose Bedrock Concrete Pros for Decorative Concrete
- Licensed & insured — Utah Lic. #14282236-5501; proof of insurance available on request
- Free, detailed written estimates — with finish options and color samples so you know exactly what you’re getting
- Air-entrained 4,000 PSI concrete — the right mix spec for Utah’s freeze-thaw environment
- Proper sub-base & reinforcement — no shortcuts on the foundation that determines how long your decorative concrete lasts
- Experienced stamping crew — stamp timing is critical; we don’t rush it or let it go too long
- Backed by our workmanship warranty — we stand behind the work we pour
Serving All of Utah County
We install stamped and decorative concrete throughout Provo, Orem, Lehi, American Fork, Pleasant Grove, Springville, Spanish Fork, Mapleton, Lindon, Vineyard, Saratoga Springs, Eagle Mountain, and into south Salt Lake County.
We also pour related concrete work you might need at the same time: patios, driveways, walkways, and pool decks — all with decorative finish options.
Stamped Concrete FAQs
How long does stamped concrete last in Utah?
Properly installed and sealed stamped concrete can last 25–40 years or more. The keys are a solid compacted base, air-entrained 4,000 PSI concrete with correct thickness (typically 4 inches for patios, 4–5 inches for driveways), properly spaced control joints, and resealing every 2–3 years. Utah’s freeze-thaw cycles and high UV exposure are hard on the sealer coat, so keeping up with re-sealing is the single most important maintenance step.
Can stamped concrete be done in Utah winters?
Stamped concrete is poured during a specific window in the concrete’s cure process, so temperature and timing matter more than with a plain broom finish. We can pour in cooler weather with appropriate protection, but for best results with stamped work, late spring through early fall is the preferred window. We’ll be upfront about timing trade-offs at your estimate.
Will stamped concrete get slippery when wet?
Smooth-pattern stamps on flat surfaces can be slippery when wet, which is why pattern choice and sealer type matter. For pool decks and areas that get wet regularly, we recommend textures with more surface relief (seamless stone, slate skin) and an anti-slip additive in the sealer. We’ll recommend the right combination for your specific application.
Can I add color to an existing concrete slab?
Yes — acid staining or water-based staining can add color to a cured concrete surface. The result depends heavily on the condition and porosity of the existing slab. Staining won’t hide major cracks or scaling, but on a sound slab it’s a cost-effective way to add color without tearing out and replacing. We can assess your existing concrete and tell you whether staining is a good option.
How does stamped concrete hold up to de-icing salt?
Not well — and this applies to all decorative concrete, not just stamped. De-icing salts accelerate surface scaling by drawing moisture in and out of the slab. We strongly recommend avoiding salt the first winter entirely (when the concrete is still curing and the sealer is new), and using sand for traction instead of salt in subsequent winters. A fresh coat of quality sealer each season before winter is your best defense.
What is the difference between stamped concrete and exposed aggregate?
Stamped concrete uses rubber mats to press a pattern into fresh concrete, creating the look of stone, brick, or other materials. Exposed aggregate involves washing the surface cement paste off to reveal the decorative rock in the concrete mix — the result is a textured, natural-looking surface with no pattern lines. Exposed aggregate tends to be slightly less expensive than stamped and is particularly popular for pool decks and walkways because of its natural slip resistance.
Request Your Free Quote
Tell us about your project and we’ll get back to you fast. Prefer to talk? Call (801) 854-7174.
Ready to Upgrade Your Outdoor Space?
Get a free, written estimate for stamped or decorative concrete anywhere in Utah County or the Wasatch Front. We’ll bring color samples and walk you through your options.