Concrete Contractor · Salt Lake City, UT

Residential concrete driveway along the Wasatch Front
Concrete work for local Utah homeowners

Concrete Contractor in Salt Lake City, UT

Salt Lake City’s older neighborhoods, clay-heavy soils, and hard Wasatch winters demand a concrete contractor who knows what it takes to make a slab last. Bedrock Concrete Pros brings licensed, insured expertise to SLC homeowners — from the Avenues and Sugar House to the west side — for driveways, patios, sidewalks, and more.

Salt Lake City is one of the most geologically demanding places to pour concrete in the Intermountain West. The Avenues and east-bench neighborhoods sit on bentonite-rich clay soils left behind by ancient Lake Bonneville — soils that swell when wet and shrink when dry, putting relentless stress on slabs from below. Meanwhile, the city records anywhere from 30 to 60 freeze-thaw cycles in a typical winter, which is punishing on concrete that was installed without the right mix or base prep. Older SLC housing stock — the craftsman bungalows in Sugar House, the Victorian-era homes along the Avenues, the mid-century ranches in the Yalecrest and Wasatch Hollow neighborhoods — often sits on original 1950s or 1960s concrete that has long since reached the end of its useful life.

Bedrock Concrete Pros serves Salt Lake City homeowners who are ready to replace crumbling driveways, upgrade aging sidewalks, or add outdoor living space with a new patio. We bring the same freeze-thaw-hardened approach we use throughout the Wasatch Front: air-entrained 4,000 PSI concrete, compacted road-base sub-base, proper reinforcement, and control joints placed to manage inevitable shrinkage. Every job is backed by our workmanship warranty and starts with a free, written estimate — no pressure, no guesswork.

Concrete Services Available in Salt Lake City

We handle the full range of residential concrete work for SLC homeowners. Whether you need a simple sidewalk panel replaced or a complete driveway tear-out and rebuild, we can help:

Why Salt Lake City Concrete Requires Local Know-How

Not every concrete contractor is prepared for what Salt Lake City’s soil and climate throw at a slab. The Lake Bonneville clay soils that underlie much of the city are among the most expansive in Utah — they absorb water and heave, then dry out and settle, in a seasonal cycle that can crack or tip a poorly anchored slab within just a few winters. On top of that, Salt Lake City sits at around 4,300 feet elevation, and the valley’s temperature swings mean a concrete slab can go from a 70-degree afternoon to a below-freezing night in the same day during shoulder seasons.

Here is what we do differently to account for these conditions:

  • Air-entrained 4,000 PSI concrete — the entrained air gives water room to expand during freeze cycles without spalling the surface or pushing aggregate apart.
  • Thorough sub-base work — we excavate clay soils, add and compact crushed road base to provide a stable, well-draining platform for the slab.
  • Rebar or wire-mesh reinforcement — keeps the slab tied together if the ground moves beneath it.
  • Proper control joints — placed at the right spacing so that shrinkage cracks happen in a straight line where you can manage them, not randomly across the surface.
  • Drainage slope — every slab is graded to move water away from foundations, not pool against them.
  • Sealing guidance — we advise every SLC customer to seal their concrete and avoid road-salt de-icers, especially during the first winter after a pour. Read more in our Utah concrete maintenance guide.

What to Expect When You Work With Us

Every Salt Lake City project follows a clear, straightforward process from first call to final walkthrough.

  1. Free On-Site Estimate

    We come to your Salt Lake City home, measure, assess site conditions, and give you a written quote — no vague price ranges, no pressure.

  2. Design & Scheduling

    Pick your finish, thickness, and any upgrades. We work around your schedule and give you a clear start date.

  3. Base Prep, Pour & Finish

    We excavate, compact the base, set forms, reinforce, pour air-entrained concrete, and finish to a clean, durable surface.

  4. Cure, Joints & Walkthrough

    Control joints are cut, you get curing and sealing instructions, and we walk the finished job with you before we leave.

Salt Lake City Concrete FAQ

Do you work in Salt Lake City proper, or just the suburbs?

We serve Salt Lake City homeowners directly, including neighborhoods like the Avenues, Sugar House, East Bench, Harvard-Yale, Yalecrest, Liberty Wells, and the west side. If you’re not sure whether we cover your specific address, call or text us at (801) 854-7174 and we’ll confirm quickly.

My driveway is original 1950s concrete. Should I repair it or replace it?

If the slab has widespread cracking, heaving sections, or significant surface spalling, replacement is almost always the better long-term value. Patching and resurfacing can extend a structurally sound slab, but old SLC driveways with clay-soil settling issues typically need a fresh pour on a properly compacted base. We’ll give you an honest recommendation at your free estimate — no upsell.

How do Salt Lake City’s soils affect my concrete?

The bentonite clay soils common in SLC expand significantly when wet and contract when dry. This seasonal movement can crack, tilt, and undermine concrete that was poured without adequate sub-base preparation or reinforcement. Proper excavation, compacted road-base fill, and rebar are essential in Salt Lake’s clay zones — not optional upgrades.

Can I use road salt or ice melt on new concrete in Salt Lake City?

We strongly recommend against it, especially during the first winter after a new pour. De-icing salts — and the salt-laden sand SLC spreads on roads — accelerate surface scaling and spalling on concrete. Use kitty litter, sand, or a concrete-safe de-icer if you need traction. Sealing your concrete provides an extra layer of protection. See our guide on sealing frequency for details.

How much does a concrete driveway cost in Salt Lake City?

Installed prices for a standard broom-finish concrete driveway in the Salt Lake area typically run $8–$16 per square foot. Stamped or decorative driveways range $14–$20 per square foot. Tear-out and replacement including haul-off of the old slab runs $10–$18 per square foot. These are estimates — your exact cost depends on size, site access, soil conditions, and finish. Request a free quote for a written number specific to your project.

Are you licensed and insured in Utah?

Yes. Bedrock Concrete Pros holds Utah Contractor License #14282236-5501 and carries full liability insurance. We can provide proof of insurance on request. We operate out of Provo and serve the full Wasatch Front including Salt Lake City.

Have a question that isn’t covered here? Send us a message or call (801) 854-7174 Mon–Fri 8AM–6PM.

Nearby Areas We Also Serve

Bedrock Concrete Pros is based in Provo and works throughout Utah County and the Wasatch Front. Salt Lake City neighbors can also find us in:

View all service areas or contact us to confirm your address is within our range.

Request Your Free Quote

Tell us about your project and we’ll get back to you fast. Prefer to talk? Call (801) 854-7174.

Get a Free Concrete Estimate in Salt Lake City

Tell us about your project and we’ll schedule a free on-site visit. Licensed, insured, no-pressure — just a clear, written estimate for your Salt Lake City home.

☎ (801) 854-7174